Modular Operating Theatres Are Becoming The New Trend

Modular Operating Theatre rapid assembly technology, including operating theatre walls, ceiling materials, skeleton, base layer, surface layer in block mode in the workshop production is completed, the site directly assembled in one piece.

Traditional Operating Theatres and other purification construction and installation technology, often facing quality and duration can not meet the construction needs, not enough environmental protection, construction waste and other issues! And Modular Operating Theatre rapid assembly technology can effectively solve the problems existing in the Traditional Operating Theatre.

Features of Modular Operating Theatre construction

• Environmental protection: All panels are prefabricated in advance in the factory, no cutting and welding are required on site, and there is very little construction waste, which reduces the waste of resources and environmental pollution.

• Fast construction speed: After the site has the installation conditions, the panels can be transported to the site to start assembly, modular installation is simple and fast, compared with the traditional construction process, greatly reducing the construction cycle.

• Forward-looking: Modular Operating Theatre is easy to dismantle and install, the transformation of the Department of Surgery can be dismantled as a whole or partially, without affecting the main structure of the building, which is convenient for the hospital's future development and transformation.

Features of the modular installation process

Safety

• Structural strength: Single structural panel can bear weight up to 200KG without deformation.

• Fire resistance: The fire resistance of modular structural panels reaches A1 level.

• Anti-bacteria: The microbiological test of the modular structural panel is 99%, which meets the requirements of Class 1 standard.

Eco-friendly

The whole modular structural panels are completely prefabricated in the factory, no cutting is required at the construction site, which does not produce too much construction waste and reduces noise pollution and dust.

The structural panels and facilities used are connected by screws only, without welding, reducing fire safety hazards and high-temperature deformation.

The pattern and colour of the surface layer are all customised in the factory, and there is no need to spray paint on site, reducing formaldehyde and other organic volatiles.

Low cost and short construction period

Through the use of full-systematic pre-design, prefabrication of building components in advance, modular panels packaged and shipped to the site, the construction staff according to the installation drawings, in accordance with the order and location, the site directly assembled to reduce the workload on the construction site, reduce the number of construction workers, thereby reducing the overall construction costs, and to minimise the impact of construction on the development of the hospital's business. The special standard connectors are used for insertion and assembly, and all the assemblies are connected by screws without any welding, which shortens the construction time by more than double compared with the traditional process.

Easy to upgrade at a later stage

Modular components production, which components need to be replaced to remove which piece, easy to dismantle and install.

If upgrading is required, it can be dismantled and installed as a whole, minimising the impact on other main structures.